An Introduction to Assessment Validation: Validating Assessments Explained
An Introduction to Assessment Validation: Validating Assessments Explained
Blog Article
Among the numerous obligations RTOs face post-registration—annual declarations, AVETMISS reporting, marketing compliance—validation is often the most dreaded.
Despite our extensive coverage on validation, let's re-examine the term. ASQA states that validation is a quality check of the assessment process.
Validation is the process of confirming accurate areas in an RTO's assessment process and pinpointing elements for improvement. With a correct understanding of its components, it’s less daunting.
Clause 1.8 in the SRTOs 2015 outlines that RTOs must ensure their assessment systems, including RPL, comply with training package requirements and the Principles of Assessment and Rules of Evidence.
According to the standards, two types of validation are necessary.
The primary validation type ensures compliance with the training package requirements for your RTO's assessments.
The subsequent validation type ensures assessments are in line with the principles of assessment and rules of evidence.
It indicates that validation occurs both before and after the assessment. The focus here is on the first type: assessment tool validation.
The Basics of the Two Types of Assessment Validation
Decoding Assessment Validation
As noted earlier and in our earlier blog entries, validation is split into two stages: (1) assessment tool validation and (2) post-assessment validation.
Assessment tool validation, also called pre-assessment validation, pertains to ensuring all unit requirements are addressed, as outlined in the first part of the clause, ensuring total workbook compliance.
Conversely, post-assessment validation focuses on the implementation side, ensuring Registered Training Organisations conduct assessments in line with the Principles of Assessment and Rules of Evidence.
This piece will highlight assessment tool validation.
How to Properly Conduct Assessment Tool Validation
With a grasp of the two validation types, let’s focus on assessment tool validation.
Ideal Times to Conduct Assessment Tool Validation
Assessment tool validation aims to verify that all elements, performance criteria, and performance and knowledge evidence are covered by your assessment tools.
Therefore, whenever you acquire new learning resources, you must conduct assessment tool validation before allowing students to use them.
You don’t need to wait until your next 5-year validation schedule. Immediately validate new resources to ensure they’re ready for student use.
Still, this isn't the only reason for this type of validation. Conduct assessment tool validation when you:
- resources are updated
- new training products are added on scope
- your course includes training product updates
- your risk assessment includes identifying your learning resources as a risk
The Australian Skills Quality Authority's risk-based approach to regulation means RTOs must conduct regular risk assessments. Complaints from students about learning resources signal the need for assessment tool validation.
Which Training Products Should You Validate?
It's crucial to remember this validation ensures compliance of all learning resources before they are used. All RTOs should validate resources for each unit.
Starting Assessment Tool Validation: What You Need
Training Materials
Since you are conducting assessment tool validation, you will need the entire suite of your learning resources:
Mapping tool – the first document you should look at. It highlights which assessment items meet unit requirements, accelerating validation.
Learner/student workbook – ensure it is suitable as an assessment tool during validation. Check if instructions are clear and answer fields are sufficient. This is a common issue.
Assessor guide/marking guide – check that there are sufficient instructions for assessors and clear benchmarks for each assessment item. Clear benchmarks are vital for reliable assessment outcomes.
Other related resources – may consist of checklists, registers, and templates developed independently from the workbook and marking guide. Validate them to confirm they suit the assessment task and address unit requirements.
Validation Group
Clause 1.11 describes the requirements for validation panel members, stating that validation can be conducted by one or more individuals. RTOs often require all trainers and assessors to be present, occasionally including industry experts.
As a whole, your validation panel must have:
Current vocational competencies and relevant industry skills for the unit being validated
Recent knowledge and skills in vocational teaching and learning
Any one of the following training and assessment credentials:
TAE40116 Certificate IV in Training and Assessment or its future version
Validation tool/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
A validation tool is beneficial for both the validation process and documentation. It makes it easier to understand how each assessment item aligns with each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
Additionally, it can provide proof that you have validated your resources before students use them.
While ASQA does not recommend or require a specific template for assessment tool validation, numerous templates are available online. These tools generally require validators to examine the tools as a whole to see if they meet the principles of assessment.
Assessment Principles Guide Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
While these templates facilitate the validation process, they can result in judgment errors due to the limited space for comments on each assessment item.
A more detailed template is recommended to thoroughly inspect each unit requirement and the assessment items that align with them. Below is an example:
Element Performance Criteria Assessment Instructions Benchmarks Assessment Instrument Rectification Recommendations
What do you Need to Check?
What Should Be Checked?
As discussed in our blog post Common Problems In Assessment Tools, it’s essential that your assessment tools enable trainers to follow assessment principles and evidence rules.
Principles of Assessment
Fairness – Is equal opportunity and access provided to everyone in the assessment process?
Flexibility – Does the assessment offer various ways to demonstrate competence according to different needs and preferences?
Validity – Is the assessment evaluating what it is intended to evaluate? Is it a valid tool for assessing the required skill or knowledge?
Reliability – Will the assessment produce the same results every time, regardless of who conducts the training? Will different assessors consistently decide on skill competence?
Evidence Basic Rules
Validity – Is the evidence confirming that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is there sufficient evidence to ensure the learner has the required skills and knowledge?
Authenticity – Is the assessment tool verifying that the work is the candidate’s own?
Currency – Are the assessment tools updated to reflect current units of competency and industry practices?
Even though these are often covered in VET professional development and nationally recognised training, many tools still struggle with these requirements.
To prevent using learning resources that do not address some unit requirements, ensure you adhere to these guidelines:
Practice What You Preach
Take note of the verbs used in the unit requirements and make sure they are addressed by the assessment item. For instance, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:
Complete each of the following at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication according to service and regulatory requirements:
changing diapers
prepare bottles, feed infants from bottles, and clean equipment
solid food prep and feeding babies
respond suitably to infant signs and cues
prepare and settle babies for sleep
monitor and support age-appropriate physical exploration and gross motor skills
Having students explain changing nappies for babies under 12 months old doesn’t directly address the unit requirement. Unless it’s meant to assess underpinning knowledge (i.e., knowledge evidence), students should be carrying out the tasks.
Plurals Matter!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Pay attention to the numbers. In our CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby isn’t sufficient.
Full or Not Assessment validation checklist Australia Competent
Pay attention to lists. As noted earlier, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Add More Specificity
Every assessment item needs clear and specific benchmark answers to guide the assessor’s judgment on student competence. Thus, ensure your instructions are not confusing for students or assessors. For example:
What kind of information can be included in a work package?
What details can be included in a work package?
Possible answers may include:
Essential resources
Corresponding costs
Activity duration
Allocated duties and responsibilities
When an assessment item requires multiple answers, indicate the number of answers needed from a student. This way, your assessment is reliable, and the evidence collected is valid.
This is also true for assessment items with double-barrelled questions or questions that require more than one answer at once. Such questions can confuse both students and assessors, as illustrated in the example below:
Identify a hazard and/or environmental concern in the workplace and select the most effective hazard control hierarchy.
Possible answers can include, but are not limited to:
Weather conditions – isolating the work area, engineering controls, PPE
Work area and ground conditions – eliminating hazards, isolation, use of engineering controls
People – isolating, use of engineering controls, administration
Structural hazards – substitution, isolation, engineering controls
Chemical hazards – isolation, use of engineering controls, administration
Equipment or machinery – isolating, use of engineering controls, administration
Steering clear of double-barrelled questions makes it easier for students to answer and for assessors to accurately judge student competence.
Considering these requirements, you might think, “Don’t learning resource developers have audit guarantees?” However, such guarantees require you to wait for an audit to rectify noncompliance. This affects your compliance history, so it’s better to take a safe and compliant approach.